News

Can I Lower My Floor to Improve My Basement?

Columbus, Indiana Trip

Bricks, Inc Tour + Demo

Mentoring Millwork Design

Celebrating 30 Years of Inspired Spaces

Collaborating on Luxury Kitchen Trends

BBA Architects Continue to Educate

Finding Famous Architecture in a Cemetery

Don’t Demolish that house. Dismantle it.

Habitat for Humanity Build Day 2022

Modern Luxury Interiors North Shore

Aspire Design and Home Magazine

Historic Kenwood Remodel

Meet Maggie Willse

Meet Farnaz Sadeghi

Tribute to Broad Shoulders 2022

De-code Electronics In Your Home

Employee Spotlight - Jennifer Hense, AIA

Modern River Cottage

New Homes on the Boards in 2021

Meet Jack Callahan

Creating Outdoor Spaces

High Gables

Allison Henry Interiors Alliance

Should You Hire an Interior Designer?

North Side River Home Taking Shape

Elmhurst Historic Preservation Commission

Tudor Kitchen Renovation

Renovate or Detonate

Deconstruct & Re-Use

1880’s Historic Queen Anne

Building a Traditional Jewel Box

Building at the water's edge

North Center Craftsman

Beer Tasting + Design Presentation

Home in Berlin, Germany Comes to Fruition.

Classicist, No. 16.

Raising the Roof

bba Architects Habitat Build Day

Pool House

Lincoln Park Transformation

Urban Deep Dig #1

Golf Course Home Update

Employee Spotlight - Erica Blawat, AIA

Luxury remodel of Lake Geneva home

Building Code Undergoing a Major Change

An Excellent Italian Adventure

Can I Lower My Floor to Improve My Basement?

Ed Twohey, AIA on Apr 19, 2024

If this is a question you're asking as part of a major home remodel project, in most instances, the answer is yes. Lowering the basement slab will greatly increase the use and enjoyment of your basement space. If paired with a well-placed light well and a good-sized window, a basement room can feel every bit a part of the regular living space in the home as others. Over the years, BBA Architects has guided dozens of owners through the process. 

The cost of lowering an existing basement floor can vary widely based on the conditions, method utilized, and the amount of underground plumbing that has to be re-routed. Also important, is the access to bring equipment and material in and out of the space.    


The ground floor of BBA's 2 Flat Reborn was lowered using underpinning, a major factor in transforming the space. 


Methods

Three primary strategies are utilized in lowering a basement floor. All will yield a better ceiling condition, but will provide different perimeter conditions, and be produced at different price points. True underpinning, which results in the largest usable floor area, being the most expensive. These categories however, are broad, and specific solutions must be designed for your existing foundation type. For instance, very old buildings with limestone block foundations will require a different design than a modern concrete foundation. 

  • Lower the slab by exposing the top of the existing footing, without digging below the footing bottom

  • Benching: which lowers the slab, but does not disturb the existing footing bearing. The perimeter bench depth is proportional to the depth of the new excavation. 

  • Underpinning: a new wall is built below the existing footing, by working in small sections over multiple stages. The original foundation is transferred to the new supports, allowing removal of the floor and excavation for a lower level.


Other Benefits

In addition to the increased usability of your basement, doing this work is an opportunity to improve other aspects of your home:

  • Install new underground plumbing.
  • Putting up new drain tile and dimple fabric on the exterior walls to protect against any future moisture seepage.
  • Lay-in radiant tubing in the basement slab for a continuously warm basement floor. 

Your new foundation will be sound, and arguably stronger than the original. Ensuring many more years of comfortable living.
 


What to look for before beginning

The first step to designing  your new high-ceilinged basement is to check several conditions:

  1. Measure the distance and depth of neighboring structures and foundations:  If a building with a shallow foundation is too close to the building we are lowering, it can undermine the neighboring building. In some cases, special shoring has to be designed to protect the neighboring structures. 
  2. Verify depth and existing footing projection by digging a test hole: Often completed by your contractor, this will determine the depth and horizontal width of any new foundations. 
  3. Create a Soil Condition/Water Table: It is always advisable to get a soil bearing taken and get a geo-tech report from a soil engineer. This report will include information on soil-bearing capacity, as well as the predominant groundwater table. 
  4. Sewer invert elevation, and predominant underground plumbing: In 90% of cases, all plumbing below the basement slab will need to be re-run, and a new ejector pit installed. If the current system is a gravity-fed system, a new ejector may also be required

Before beginning the foundation project to lower the floor, we recommend that you consult a qualified structural engineer, and hire a contractor with experience in doing this type of work. Your architect can recommend professionals to work with, and show how you can best take advantage of this strategy to improve your home. 

Before beginning the foundation project to lower the floor, your architect will consult with a qualified structural engineer, and hire a contractor with experience in doing this type of work (if the homeowners haven't already).


See this video of one of our more aggressive basement restructuring projects in Hyde Park.